Características
Su bajo coste, tamaño compacto, facilidad de manejo y altas prestaciones, permite configurar una línea de corte muy versátil.
Se puede combinar, una sola devanadora, un sistema multibobina e incluso el tradicional desenrrollador con carro de carga.
| Maximum width | Material to be processed | Thickness | No. of simultaneous slitting cuts | Sped | Coil weigth | No. of straightening rolls | Straightening ServoMotor | Shears power | Measurements |
|---|---|---|---|---|---|---|---|---|---|
| 1250 | Steel 420 Nw/mm² | 1,25 mm | 2 | De 0 a 20 metre/ minute | 3, 6, 10 tonne | 2+5(2 de tiro, 2 upper y 3 lower) | 1’5 Kw | 3 Kw | 2100 x 1700 x 1450 mm 2.500 Kg |
| 1,00 mm | 4 | ||||||||
| 0,50 mm | 6 | ||||||||
| Steel 700 Nw/mm² | 0,75 mm | 2 | |||||||
| 0,50 mm | 4 | ||||||||
| Aluminium 200 Nw/mm² | 2,50 mm | 2 | |||||||
| 1,50 mm | 4 | ||||||||
| 1,00 mm | 6 |
Equipamiento
Estándar
- Guía de entrada
- 5 rodillos de enderezado
- 2 rodillos de tracción
- Cizalla de corte transversal
- Encoder de medida
- Programador táctil
- Servo-motor
- Eje de corte longitudinal completo de 2 juegos de cuchillas de ajuste rápido, hasta un máximo de 6 cuchillas
Opcional
- Aplicador de film plástico
- Distintos tipos de desenrolladores
- Sistemas de apilado
- Rebobinador
Savings in raw materials
The purchase of coil instead of format implies an average saving of 5% in raw material cost. We make the most of the coil length, thus wasting less material. This way, we will achieve a greater benefit for our final product.
Less Storage Space
The coils take up much less space than the traditional sheet metal format. They are comfortable to store, and their handling is agile and safe.
Higher productivity
A 1-ton 1-millimeter-thick coil is 850 meters long. With an Ekicontrol cutting line, we can cut 3-meter formats in less than an hour.
Straightening Quality
The quality of the straightening of our cutting lines accomplishes with the most demanding international standards.
Flexibility
The flexibility of having the circular blades implemented in the straightener module allows us to adjust the width and make all the cuts of the coil on the same machine.
Adaptability
We can adapt all kinds of reception tables of formats: scissor tables, fixed tables, tables of different lengths, interchangeable to adapt to your manufacturing needs.
Fotos y Vídeos
Opiniones de Clientes
“Before without cutting line, we had the industrial pavilion full of sheet metal formats everywhere. Now the coils are stored occupying a much smaller space and are kept protected from blows, abuse, etc. »
«We have reduced to 1 third the time to download formats to reels and we use fewer people and elements for a quality download»
“Since we use reels instead of formats, we have much less waste. The waste also implied a place to store it, a time and staff to store it and a time to load it into the scrap truck »
«Now we can make more effective purchases and save money by purchasing reels since there are no cutting or packaging processes involved.»
«The use of coils has allowed us to change the chip, and unify thicknesses and materials, thus being more productive, efficient in handling and managing materials and even having greater purchasing power»
«Before we always lacked a format of x measure or thickness, and we had to order a minimum of 3000 kg, now with the coil, it is simpler and it is always there, available for the length you need»
«The handling of the sheet is very elaborate, you have to use elements and people to maintain its quality without damaging it, with the coil to reduce handling, a single person can do it and directly go to the following processes»
«We do not understand how we have taken so long to buy a cutting line»
«It always seemed to us that another machine was going to be more productive than the cutting line, and we were wrong»
«Not depending so much on the service center gives us freedom to act and make decisions»
«Thanks to having the slitting line, I bought about 100 tons of coil from a company that needed to sell at a fantastic price»
«Before we cut everything with shears, and we have gained in health, the workers were very fatigued by the weight of the sheet metal and then pick it up from the ground by the back of the shear»
«Energy consumption has dropped considerably, the cutting line consumes very little to cut 1 sheet, when before we used the forklift or crane, the power of the shear, or the punching machine …»
Sectores de Aplicación
Maintenance
Tailor-made maintenance solutions
At EKICONTROL we offer machinery maintenance, including regular assistance to verify equipment efficiency and ensure continued productivity.
At the same time, guidance is provided to the customer’s staff to keep the equipment in the best working conditions, and to be able to analyze all the improvement options that can be incorporated into the equipment to achieve higher performance and production.
| Maintenance | Preventive | Preventive + Corrective | Preventive + Corrective + Warranty extention | ||
|---|---|---|---|---|---|
| Yearly preventive inspections | |||||
| Detailed report of the inspection | |||||
| Discount in corrective actions of the incidents detected during the inspection | 100% free | ||||
| Discount on parts replacement, during the contract period | 20% Discount in parts to be replaced | 50% Discount in parts to be replaced | 100% Discount in parts to be replaced: Replacement of shears and separators, cut to length shears, gears, oils, filters. | ||
| Operators training for the efficient use of equipment. | |||||
| Labour included during the contract period | |||||
| Travel and accommodation expenses included | |||||
| Annual replacement of all key parts, at no extra cost | |||||
Descargas
Preguntas Frecuentes
Se aconsejan hasta 3 cuchillas más como mucho, aunque hay clientes que han colocado hasta 5 más.
Los enrolladores de retales sirven para enrollar el borde de la chapa que se ha saneado. Así facilita el enrollado para su posterior desecho.
Entre otros, aluminio, galvanizado, prelacado e Inoxidable.
En la TWINCUT20 este proceso lo realiza el operario variando la penetración de los rodillos superiores de enderezado.
Entramos dentro de los parámetros de la normativa europea.
Sí, hasta un máximo de 1550 mm.
Normalmente no, pero cuando se van procesar materiales más delicados, como el inoxidable, es necesario limpiar los rodillos. Esta limpieza la realiza el operario de manera manual como mantenimiento.
Request more information
A member of our team will answer as soon as possible
